Keypad Instructions & Faults

Solution/Bosch Alarm Panel

• To Arm System

  Enter USER CODE the # (Away) eg. 1 2 3 4 # (Away)

  AWAY light comes ON

• To Disarm System

  Enter USER CODE then # (Away) eg. 1 2 3 4 # (Away)

  Away light comes OFF

• Memory Recall

  Enter MASTER CODE then 3 then # (Away) eg. 1 2 3 4 3 # (Away)

  Event is displyed – most recent displayed 1st to the least recent

• Isolate Sectors (Permission Required)

  Enter * twice, USER CODE then ZONE then * (Stay)

  Repeat for other zones to isolate, then # to exit feature eg to isolate ZONE 2: ** 1 2 3 4 02 * # (Away)

• Fault Reports

  Press and HOLD number 5 until 2 beeps are heard

  Zone light indicates FAULT condition

  Refer to chart below and once fault is identified, enter # to exit this feature

• Fault Analysis Chart

  Zone 1 – Battery low

  Zone 2 – Date/Time reset

  Zone 3 – Sensor watch fail

  Zone 4 – Horn speaker fail

  Zone 5 – Telephone line fail

  Zone 6 – EPROM fail

  Zone 7 – Fuse fail

  Zone 8 – Communication fail

• Other System Tests

  TEST REPORT – Press 9 on keypad until you hear two beeps

  SIREN – Press 1 and hold until you hear two beeps – siren will sound for 2 seconds

  BELL – Press 2 until you hear two beeps – pieza will sound for 2 seconds

  STROBE – Press 3 until you hear three beeps – this will turn stobe ON. Repeat, press 3 until you hear three beeps to turn stobe off.

• Reset Time & Date

  Enter MASTER CODE then 6 then # (Away) eg. 1 2 3 4 6 # (Away)

  Enter the current – day (DD), Month (MM), Year (YY), Hour (HH), Minute (MM) (EG 15th Nov 2007 at 15:20 hrs = 1 5 1 1 0 7 1 5 2 0 # (Away)

• Panel Sounders

  BEEPING SOUND – If plug pack is unplugged or the mains POWER is disconnected the keypad will SOUND once very minute. To silence, press 5 and hold until you hear two beeps to display fault, see fault list and instructions above then press # to exit this feature.

 *Please Note – North East Security offer additional technical support over the phone if required. A minimum fee of $25.00 inc gst  applies for up to 15 minutes and is then charged at $1.00 inc gst per minute thereafter. You will be required to provide your credit card details before the technical support can be provided. We appreciate your cooperation.